Datex-Ohmeda D-Tec Operations Instructions download pdf (Page 30)

Tec 6 Plus Vaporizer

4-2 2/16/01 1107-0641-000

Vaporizer setup procedure

WARNING The battery terminals must be firmly clipped onto the

battery to help prevent a possible disconnection when the

vaporizer is moved.

Use only a Datex-Ohmeda power cord to connect the

vaporizer to the electrical supply.

When routing the power cord to the electrical supply,

ensure that it does not interfere with the correct functioning

of other equipment.

CAUTION Do not support the vaporizer by holding the control dial

and/or locking lever. Hold the main body of the vaporizer

with both hands and keep the vaporizer in an upright

position. Failure to do so may cause the vaporizer to

malfunction.

Install only a Duracell MN1604 or VARTA Energy 2000

nine volt battery in the vaporizer. If any other battery is

installed, it can damage the vaporizer.

Installing the battery

and the power cord

A new battery and the power cord supplied with the vaporizer must be

fitted during initial installation if they are not already installed.

Step 1

Remove the battery cover.

• Invert the vaporizer.

• Unscrew the battery cover

securing screw.

• Remove the battery cover.

Figure 1-1 • Removing the battery cover

DURACELL

BATTERY COVER

SECURING SCREW

VAPORIZER

INVERTED

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 89 90

No comments

Datex-Ohmeda D-Tec Operations Instructions Page 30